arcgis無法啟動應該怎麼辦
對於新手來説,可能不清楚arcgis啟動之前需要啟動license服務,只有在服務支持的環境下,arcmap和arcglobe等軟件才可以使用。
方法
啟動失敗了,錯誤如下:
Provide your license server administrator with the following information:
Error Code = -15
Cannot connect to license server system.
The license server manager (lmgrd) has not been started yet,
the wrong port@host or license file is being used, or the
port or hostname in the license file has been changed.
Feature: ARC/INFO
Server name: localhost
License path:@localhost;
FLEXnet Licensing error:-15,570
這兩種錯誤提示都是軟件的服務沒有啟動或者啟動服務失敗造成的,解決方法是重新啟動服務!打開license manager
點擊啟動,啟動成功後確定!
然後再啟動arcmap,如圖,已經成功啟動了。所以看看你的license服務是否已經正常啟動了,如果沒有正常啟動,則啟動再打開arcgis軟件!否則無法正常打開使用!
有時候,由於軟件破解照成的問題,license服務無法啟動,點擊啟動沒有反應,這時候需要從新破解,方法:1.卸載license;2.安裝新的license!3.重新破解,替換license文件夾BIN目錄下的service.txt文件!
這三步驟即可重新破解了license,就會解決問題了!
擴展閲讀,以下內容您可能還感興趣。
arcgis license server 無法啟動怎麼辦
工具/原料
ArcGIS軟件
方法e799bee5baa631333361323033/步驟如下:
1、啟動失敗了,錯誤如下:
Provide your license server administrator with the following information:
Error Code = -15
Cannot connect to license server system.
The license server manager (lmgrd) has not been started yet,
the wrong port@host or license file is being used, or the
port or hostname in the license file has been changed.
Feature: ARC/INFO
Server name: localhost
License path: @localhost;
FLEXnet Licensing error:-15,570
或者如截圖:
2、這兩種錯誤提示都是軟件的服務沒有啟動或者啟動服務失敗造成的,解決方法是重新啟動服務!打開license manager
3、點擊啟動,啟動成功後確定!
4、然後再啟動arcmap,如圖,已經成功啟動了。所以看看license服務是否已經正常啟動了,如果沒有正常啟動,則啟動再打開arcgis軟件!否則無法正常打開使用!
ArcGIS安裝時許可管理器無法啟動怎麼辦
安裝許可管理器(License)之後,點擊License Server Administrator,打開許可管理器。點擊Start,啟動License,沒有任何反應。如果安裝和破解過程沒有錯誤的話,可以嘗試來以下步驟。
(1)原因一是Windows防火牆把License給擋住了。
此時,打開控制面板。
點擊系統與安全,進入系統與安全界面。
點擊Windows防火牆,進入Windows防火牆界面。
可以看到,屏幕左側有打開或關閉Windows防火牆一欄,點擊該欄。
選擇關閉Windows防火牆,並確定。
重新啟動License。如果還是沒有源反應的話,重新安裝ArcGIS後再次嘗試。如果還是不行的話,可以看下面的原因二。
(2)原因二
如果嘗試了以上方法,但是License仍然無法啟動。那麼請檢查ArcGIS的安裝和破解過程是否有誤,並且有沒有出現軟件衝突(例如:ERDAS),如果都沒有的話,那麼就有可能是系統問題了。
雖然這種情況很少出現,但如果屬於該種情況,請重裝zd系統。
ArcGIS安裝時許可管理器無法啟動怎麼辦
原因一
1
安裝許可管理器(License)之後,點擊License Server Administrator,打開許可管理器。
2
點擊Start,啟動License,沒有任何反應。如果安裝和破解過程沒有錯誤的話,可以嘗試以下步驟。
3
問題之一就是Windows防火牆把License給擋住了。此時,打開控制面板。
4
點擊系統與安全,進入系統與安全界面。
5
點擊Windows防火牆,進入Windows防火牆界面。
6
我們可以看到,屏幕左側有打開或關閉Windows防火牆一欄,點擊該欄。
7
選擇關閉Windows防火牆,並確定。
8
重新啟動License。如果還是沒有反應的話,重新安裝ArcGIS後再次嘗試。如果還是不行的話,可以看下面的原因二。
原因二
如果你嘗試了以上方法,但是License仍然無法啟動。那麼請檢查ArcGIS的安裝和破解過程是否有誤,e79fa5e98193e58685e5aeb931333339653764並且有沒有出現軟件衝突(例如:ERDAS),如果都沒有的話,那麼就有可能是系統問題了。
本人在實際中遇到過該問題,一台重裝了系統的電腦,安裝License後無法打開,ArcGIS安裝正確,沒有軟件衝突,防火牆已關閉。雖然這種情況很少出現,但如果很不幸,你屬於該種情況,那麼請重裝系統吧...
arcgis license server 無法啟動怎麼辦
關閉windows防火牆,先把DeskTop,Lisence都卸載了,把空的文件夾和有關的註冊表都刪了(來註冊表可以用cccleaner或者360刪除),然後重啟計算機,再安裝。如果源還是出現錯誤,重複知上述步驟,運行regedit進入註冊表,找到HKEY_LOCAL_MACHINE>SYSTEM>CurrentControlSet>Control在右邊的顯示欄裏新建RegistrySizeLimit_oldREG_DWORD0x4d00000(80740352),再重啟,安裝。多道試幾次,應該就能安裝成功,我也是弄好了好久才好的。
arcgis license server 無法啟動怎麼辦
啟動失敗了,錯誤如下:
Provide your license server administrator with the following information:
Error Code = -15
Cannot connect to license server system.
The license server manager (lmgrd) has not been started yet,
the wrong port@host or license file is being used, or the
port or hostname in the license file has been changed.
Feature: ARC/INFO
Server name: localhost
License path: @localhost;
FLEXnet Licensing error:-15,570
這種錯e5a48de588b6e79fa5e9819331333339653639誤提示是軟件的服務沒有啟動或者啟動服務失敗造成的,解決方法是重新啟動服務!打開license manager,點擊啟動,啟動成功後確定!
然後再啟動arcmap,就能成功啟動了。所以先看看license服務是否已經正常啟動了,如果沒有正常啟動,則啟動再打開arcgis軟件!否則無法正常打開使用!
有時候,由於軟件破解照成的問題,license服務無法啟動,點擊啟動沒有反應,這時候需要從新破解。
方法:1.卸載license;
2.安裝新的license!
3.重新破解,替換license文件夾BIN目錄下的service.txt文件!